Dynaudio Sub 6

Sub 6, DSP, parametrinen EQ, räätälöidyt asetukset valmistajan kaiuttimille.

Aktiivisubwoofer, joka sopii saumattomasti niin Dynaudio-kaiuttimien kanssa, mutta myös hienosti muiden kaiuttimien kanssa. Uusittu elementtirakenne, hienostunut DSP ja täysialueinen parametrinen EQ takaavat autenttisen yhteensopivuuden jokaiseen kuunteluympäristöön.

Contour-mallistoa mukaileva rakenne sekä tyylikäs ulkomuoto tekevät järeästä Sub 6:sta erittäin hienostuneen. Jämäkästä rakenteesta vastaa tukeva resonoimaton kotelo ja kaksinkertaiset kaartuvat etulevyt. Tarkasta ja dynaamisesta matalatoistosta vastaa puolestaan kaksi pitkäiskuista 10 tuumaista MSP-bassoelementtiä. Sub 6 on ihanteellinen kumppani mille tahansa stereo- tai monikanavajärjestelmälle.

Tekniset tiedot

Toimintaperiaate: Aktiivinen DSP subwoofer, suljettu kotelo
Elementit: 2 x 10" (240 mm), pitkäiskuiset
Kehittynyt DSP-huonekorjaus
Vahvistinteho: 500W
Taajuusvaste (± 3 dB): 16 – 230Hz
Alipäästö: 50 - 150Hz
Lähtoimpedanssi; 100kohm
Liitännät:
2 x XLR (input/output)
2 x RCA (input/output)
Virrankulutus valmiustilassa: <0.5W
Mitat (L x K x S): 470 x 333 x 268 mm
Paino: 21.5 kg

High-end low end

The subwoofer that matches seamlessly with your Dynaudio speakers… intelligently. Brand-new driver design, sophisticated DSP and full parametric EQ ensure a tailor-made fit for your set-up.

Sub 6

High-end low end. The subwoofer that matches seamlessly with your Dynaudio speakers… intelligently. Brand-new driver design, sophisticated DSP and full parametric EQ ensure a tailor-made fit for your set-up.

The Sub 6 is designed to integrate seamlessly with all Dynaudio speakers – and it has a special trick up its sleeve to do just that…

It features advanced intelligent DSP technology that tailors its performance so closely to a user’s system that it can confidently turn a two-way speaker system in a three-way one. For other models, including non-Dynaudio speakers, the crossover frequency, gain and phase can be set manually.

In charge of its powerful bass response are two brand-new 24cm MSP+ Hybrid Drive units, designed specifically for subwoofers, alongside a 500W power amplifier built into its base. These new drivers sit at either end of the carefully constructed sealed enclosure design, which stands wider than it does deep to help it sit more discreetly against a wall.

The Sub 6 has dual RCA and XLR connections to suit most systems and comes with a number of handy features to help larger and more advanced setups. This includes the ability to set a time-delay to ensure the sub and speakers are working perfectly in sync with one another. All a user has to do is enter the distance from the sub to the speakers and the sub will adjust itself automatically using both time and phase delays. There’s also a fully parametric EQ, including three filters to counter the effects of any room modes, to ensure the best possible performance.

And its presets are designed to work with these speakers…

Confidence C1

Confidence C2

Confidence C4

Confidence 20

Confidence 30

Confidence 50

Confidence 60

Contour 20i

Contour 30i

Contour 60i

Contour 20

Contour 30

Contour 60

Contour S 1.4 LE

Contour S 3.4 LE

Evidence Temptation

Evidence Platinum

Evidence Master

Evoke 10

Evoke 20

Evoke 30

Evoke 50

Special Twenty-Five

Special Forty

Heritage Special

Focus 20 XD

Focus 30 XD

Focus 60 XD

Why is there no preset for Focus 10/30/50 active speakers? When using Sub 6 with these models the subwoofer alignment is controlled by the speaker, not the subwoofer. In this case, the crossover in the Sub 6 should be set to “bypass”.